ABS bow repair question

Decked Canoes, Open Canoes, as long as they're canoes!

Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin

milkman
C Maven
Posts: 1106
Joined: Mon May 01, 2006 9:13 pm
Location: Portland, Oregon
Contact:

Post by milkman »

I bought the ABS sheet a while again with the intention of turning it into a paste. I can't remember what I bought exactly, but it's about 1/16" thick. When I'm done, the repair will have be 3/16" thick. This is a lot of gluing, but seems to be working really well in terms of fitting the contours of the bow area of a Dagger Phantom. The soft spot is just a little down from the bow where the bottom of the boat begins.

Air bag, fuse, huh?
Post Reply