airbag lacing

Decked Canoes, Open Canoes, as long as they're canoes!

Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin

Post Reply
User avatar
busterblue
CBoats Addict
Posts: 254
Joined: Mon Feb 07, 2011 5:31 pm
Location: Ridgefield, WA

airbag lacing

Post by busterblue »

I have a Wenonah Solo Plus made with Tuf-weave. (Their website says Tuf-weave is a combination of polyester and fiberglass). The gunwales are aluminum.

I paddle the boat solo, and I would like to add lacing for extra flotation. I've been reading on Cboats that it's pretty standard to drill through the hull. Is that just for Royalex boats? Will it work with this Tuf-weave stuff? Any special considerations for drilling through fiberglass?
solo-plus-outside-gunwale.jpg
solo-plus-inside-gunwale.jpg
Paddle Power
C Maven
Posts: 1041
Joined: Wed Nov 20, 2002 2:18 am
Location: Manitoba, Canada
Contact:

Re: airbag lacing

Post by Paddle Power »

I've seen holes drilled through the hull of composite boats for airbag lacing.
Brian
http://www.JohnstonPursuits.ca" onclick="window.open(this.href);return false;
Roy
C Guru
Posts: 173
Joined: Tue Feb 11, 2003 5:56 pm
Location: Greenville, ME

Re: airbag lacing

Post by Roy »

I have a Tuff-weave boat, with drilled lacing holes, sitting in my yard right now. No problems or issues.

I have also drilled lots of other composite hulls for bags.

Roy
Bob P
CBoats Addict
Posts: 770
Joined: Thu Jan 16, 2003 10:04 pm
Location: Connecticut

Re: airbag lacing

Post by Bob P »

Deburr the holes so that the edges don't abrade the cords.
Bob P
Peter K.
C Boater
Posts: 40
Joined: Sun Jan 31, 2010 7:57 pm

Re: airbag lacing

Post by Peter K. »

My Echoee has the cages drilled through the hull with grommets to protect the string.
NickParker
C Guru
Posts: 112
Joined: Sat Jul 23, 2011 1:03 pm
Location: Fort Payne AL

Re: airbag lacing

Post by NickParker »

For a clean hole when drilling composites (or most anything for that matter), clamp a scrap piece of wood on the back side. That prevents tear out, and allows the bit to make a clean cut as it exits the hole.

But looking at the photo of your boat, drilling through the flanges of your aluminum gunwales is an option. That would get the holes up nice and high, and there would be no concerns about damaging the composite, because both sides of it are protected by aluminum. The holes you will be drilling are small, and spaced apart, so I would not be concerned about them weakening the gunwale. You're just not removing enough aluminum to have that kind of impact.

If you do drill through the aluminum, as a second step use a chamfer bit on both sides to remove the sharp corners of aluminum. This is really quick and easy, and chamfer bits are cheap and readily available (if you don't already have one).
Paddle Power
C Maven
Posts: 1041
Joined: Wed Nov 20, 2002 2:18 am
Location: Manitoba, Canada
Contact:

Re: airbag lacing

Post by Paddle Power »

I agree with NickParker posting.
Brian
http://www.JohnstonPursuits.ca" onclick="window.open(this.href);return false;
gerrit
c
Posts: 11
Joined: Fri Oct 31, 2014 7:40 am

Re: airbag lacing

Post by gerrit »

You can also glue webbing loops to the hull:
http://www.canadierforum.de/t9050f4-Pro ... ten-1.html" onclick="window.open(this.href);return false;
Bob P
CBoats Addict
Posts: 770
Joined: Thu Jan 16, 2003 10:04 pm
Location: Connecticut

Re: airbag lacing

Post by Bob P »

gerrit wrote:You can also glue webbing loops to the hull:
http://www.canadierforum.de/t9050f4-Pro ... ten-1.html" onclick="window.open(this.href);return false;
I did something like that to my boats. I would check the glue adhesion to the hull first though.

Image
Bob P
User avatar
busterblue
CBoats Addict
Posts: 254
Joined: Mon Feb 07, 2011 5:31 pm
Location: Ridgefield, WA

Re: airbag lacing

Post by busterblue »

Thanks for the input. It's good to know that it's safe to drill.

I also like the idea of gluing webbing loops or something similar. Is there a piece of hardware made for that purpose?
Ianonetwothree
c
Posts: 16
Joined: Tue Aug 02, 2016 11:40 am

Re: airbag lacing

Post by Ianonetwothree »

I'd just drill and be done with it. 30 min and you re finished.
Post Reply