Rediscovering The Finkenmeister

Decked Canoes, Open Canoes, as long as they're canoes!

Moderators: TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin, kenneth, sbroam

Post Reply
User avatar
Bruce Farrenkopf
CBoats Addict
Posts: 330
Joined: Mon Sep 01, 2003 3:35 am
Location: Reno, NV

Rediscovering The Finkenmeister

Post by Bruce Farrenkopf »

I've been paddling a converted Pyranha H3 255 for several years and definitely like the boat. Recently I had the H3 on the Farad section of the Truckee River - a class 3+ run with one 4 at the level we ran it (2000 cfs). This section of the Truckee also has two fun but bumpy 15 ft dams to run which mandate a plastic boat.

Point 1: The H3 felt like a cork on that pushy run. It is SLOW, doesn't surf and got pushed around in the bigger water. I was thinking "I wish I had my old Dagger Atom" - then it came to me :o ....get back into your Finkenmeister - the boat that has been on the back shelf in my garage for 3 years - and try it on this run.

I can hear a few groans out there :wink: .

I paddled der Finkenmeister on the Farad run and it turned out to be a MUCH better boat than the H3 for this type of class 3+ run. It was considerably FASTER and SURFS and was much more fun to paddle. It didn't feel like a cork.

Point 2: I now have a great boat for moderate water that I can bang around on rocks and dams. The right boat for the right application makes a world of difference.

I seem to be saying the obvious, but rediscovering the Fink has made boating more interesting for me. Get into that garage, dig out an old boat and give it a another try. You might be surprised :D !

SYOTRiver,

Bruce Farrenkopf
Sir Adam
CBoats.net Staff
Posts: 4119
Joined: Mon Apr 08, 2002 12:00 am
Location: Adirondacks, NY State, USA
Contact:

Post by Sir Adam »

I picked up a fink this spring, and finally hopped in it the other day to see if I could roll it (having read they are a bit tough). Stock outfitting, though beaver tails not bolted in.

Popped right up easily. I'm sure it would have been different in *interesting* water, not flatwater, but I'd forgot what rolling with all that volume was like (rolling boats that look like ironing boards is what i'm used to :lol: ).

I totally agree on pulling out an old boat... and if anyone in the Northeast wants to drop in to try some of the collection, just let me know. Short of the Aerobat, Meltdown, and Ceemweever I have one of almost each rec. C1 producted, plus a few race boats. Pagan isn't on site yet, but hopefully very shortly:)

It's fun, and eye-opening, to paddle some of the older and newer designs back to back.
Keep the C!
Adam
User avatar
PAC
CBoats.net Staff
Posts: 3311
Joined: Thu Nov 07, 2002 1:07 am
Location: Pittsburgh, PA

Post by PAC »

Bruce - Nice on the Fink... I like it as a creeker and overall boat. You just have to modify your style to match its strenths - get forward and get going.
I think Mike W would agree that it aint bad on some steeper stuff! Right Mike? :wink:
No boat does it all but you can get out and have fun in almost any boat. Paul C.
Paul C.
Cboats Moderator
Official TOG Member (Team Old Guy)!
User avatar
Mike W.
CBoats.net Staff
Posts: 2197
Joined: Fri Jan 03, 2003 10:52 pm
Location: Roanoke Rapids, NC
Contact:

Post by Mike W. »

PAC wrote:I think Mike W would agree that it aint bad on some steeper stuff! Right Mike? :wink: Paul C.
Oh yeah! It's on my watch list. I don't have a whole lot of use for plastic boats, but I'm interested in adding a Fink to my fleet.
User avatar
oopsiflipped
CBoats Addict
Posts: 954
Joined: Sat Jun 03, 2006 3:32 am

Post by oopsiflipped »

c'mon bruce. there is no way you could have heard me groaning. i hadn't even groaned yet when you wrote that and you're on the other side of the country! :wink:

but i do miss most of the boats i used to have. other than having to carry the dang thing, it would be fun to have an atom again.
Larry Horne
C Maven
Posts: 1447
Joined: Tue Apr 13, 2004 2:39 am
Location: Northern California

Post by Larry Horne »

ugh. :wink:
Larry
Post Reply