Wanted: Mad River Flashback repair help

Decked Canoes, Open Canoes, as long as they're canoes!

Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin

in_a_silent_way
c
Posts: 6
Joined: Thu Apr 16, 2009 6:34 pm

Post by in_a_silent_way »

Again, thanks so much for all the efforts made so far. The rivers are rising around here so I am looking forward to running a few in my 'new' canoe.
Carol
C Guru
Posts: 148
Joined: Fri Jul 20, 2007 1:37 am
Location: Eureka, Calif

Post by Carol »

Is this enough information, or do I need to have him measure the length of the individual thwarts?

Carol


"Carol,

I measured the thwarts from the stern down the center line. These measurements are from the tip of the stern to the center of the thwarts:

43 1/4", 66 1/4", and 114 1/2".

Good Luck,
Chuck""
Post Reply