I'm on the lookout for a few boats still to round out the collection... if you see one of these for sale, have one for sale (or donation!) please let me know.
Aerobat (preferably low cut)
Any Noah boat designed as a C1 rec boat (Atlantis, Lava, Scimitar, etc...)
Shaggy Jedi
Perception Sage (I have one but it is no longer floats)
I'm "missing" a Meltdown and Ceemweaver too, but finances willing hope to have those built in the next few years.
It's getting to be quite the collection. As always if anyone wants to come try out old boats let me know - the few that have all had a great time!
An appeal to the CBoats community...
Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin
-
- CBoats.net Staff
- Posts: 4136
- Joined: Mon Apr 08, 2002 12:00 am
- Location: Adirondacks, NY State, USA
- Contact:
An appeal to the CBoats community...
Keep the C!
Adam
Adam
Well, I converted a Noah Lava into a Magma, the kayak version. I know there is an unaltered Magma in existence in the SE, so if you can find it, you can convert it to C-1. But consider..... people who paddled the c-1 version, only 24" wide with rather sharp chines, tumblehome slab sides, and very little initial or final stability, HATED it.
It was a mystery to me how Vladimir could design a rather flat-bottomed boat with so little stability. Then I realised that all the kayaks made prior to that time, including Noah, were quite elliptical and had low initial stability. That was what Vlad was used to. He could edge the Magma very easily and those edges would carve brilliantly. The Lava/Magma is fast, too. But the c-1 version was not a serious river runner, just a platform for frequent rolling practice. Doesn't roll easily either. It is actually at its most stable when upside down.
Vladimir used to show up at my boat inspection station for the Southeastern Slalom with his personal Magma, with temporary FG extensions on the bow and stern to meet the 4 meter length requirement. He did pretty well.
Anyway, the Lava was so unsuccessful that only a must-have-one-of-everything fanatic would spend time and hope looking for one. You might try for a full range of Atlantis's instead. They changed significantly over time. Much better river runners.
It was a mystery to me how Vladimir could design a rather flat-bottomed boat with so little stability. Then I realised that all the kayaks made prior to that time, including Noah, were quite elliptical and had low initial stability. That was what Vlad was used to. He could edge the Magma very easily and those edges would carve brilliantly. The Lava/Magma is fast, too. But the c-1 version was not a serious river runner, just a platform for frequent rolling practice. Doesn't roll easily either. It is actually at its most stable when upside down.
Vladimir used to show up at my boat inspection station for the Southeastern Slalom with his personal Magma, with temporary FG extensions on the bow and stern to meet the 4 meter length requirement. He did pretty well.
Anyway, the Lava was so unsuccessful that only a must-have-one-of-everything fanatic would spend time and hope looking for one. You might try for a full range of Atlantis's instead. They changed significantly over time. Much better river runners.
-
- CBoats.net Staff
- Posts: 4136
- Joined: Mon Apr 08, 2002 12:00 am
- Location: Adirondacks, NY State, USA
- Contact:
Understood - and though I expect to track down an aerobat at some point, I'm not sure I'll ever find any of the Noah boats... but if they are out there, I'm interested (the reason for the post).
It is quite an experience to pull down 5 or 6 (or 12) boats from through out C1 "history" and paddle them back to back. Some of the old boats are better than we tend to recall... and some of them really aren't!
It is quite an experience to pull down 5 or 6 (or 12) boats from through out C1 "history" and paddle them back to back. Some of the old boats are better than we tend to recall... and some of them really aren't!
Keep the C!
Adam
Adam
- Kelly-Rand
- CBoats Addict
- Posts: 360
- Joined: Wed Nov 13, 2002 6:55 pm
- Location: Boston MA